Quantum DLT 8000 Manual descarregar pdf (Página 92)

100

101

Configuring, Installing, and Operating the Tape System

2-38 Quantum DLT 8000 Tape System

2.6 Power On Self Test (POST) and Indicator Activity During POST

When power is applied to the tape system, it performs power-on self testing (POST). The

sequence of events that may be observed is:

Table 2–11 Indicator Activity During POST

Stage What Can be Observed

1 Indicators on the right-hand side of the front panel illuminate in

sequence from top to bottom. All indicators remain illuminated for a

few seconds.

2 The indicators along the left-hand side of the front panel illuminate

together for about three seconds then extinguish.

3 The green Operate Handle, orange Write Protected and yellow User

Cleaning Tape indicators extinguish. The yellow Tape in Use indicator

blinks while the tape system initializes.

4 Following initialization, the tape system is in one of the states described

in Table 2-12.

Table 2–12 Possible Tape System States Following Initialization

State Indicator Display and Activity

A tape cartridge is present and

the handle is down

The tape system loads the medium from the cartridge. When the

yellow Tape In Use indicator stops blinking and remains

illuminated. The indicator next to the tape’s actual density is

illuminated. When Density Override blinks, a density may be

selected. The tape system is ready for use and the media is

positioned at BOT.

No tape cartridge present

1. Yellow Tape in Use indicator extinguishes.

2. Green Operate Handle indicator illuminates.

3. Insert/Release Handle is unlatched.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 407 408

Comentários a estes Manuais

Sem comentários

Quantum DLT 8000 Manual Página 92

Comentários a estes Manuais

Manuais e produtos relacionados com Unidades de fita magnética Quantum DLT 8000