Quantum DLT 8000 Manual descarregar pdf (Página 180)

100

101

SCSI Commands

5-36 Quantum DLT 8000 Tape System

LOCATE Command (2Bh) (continued)

Table 5–15 LOCATE Command Descriptor Block — Field Descriptions

Field Name Description

BT Block Type. The Block Type bit indicates how the Block Address field

is interpreted. The first recorded object (block or filemark) is at

address 0, and Block Addresses count both data blocks and filemarks.

CP Change Partition. Since multiple partitions are not supported, this bit

must be set to 0.

Immed Immediate. If this bit is set to 1, status is returned as soon as the

operation is started. If set to 0, status is returned after the operation

has completed.

Block Address The Block Address field defines the SCSI Logical Block Address to

which the media will be positioned. These addresses start at address

0 and include data blocks and filemarks.

Partition Not applicable (see Change Partition field above).

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 407 408

Comentários a estes Manuais

Sem comentários

Quantum DLT 8000 Manual Página 180

Comentários a estes Manuais

Manuais e produtos relacionados com Unidades de fita magnética Quantum DLT 8000