Quantum DLT 8000 Manual descarregar pdf (Página 276)

100

101

SCSI Commands

5-132 Quantum DLT 8000 Tape System

MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)

5.10.3.8 EEPROM Vendor Unique page (3Eh)

The tape drive supports the EEPROM vendor unique page (3Eh). All the EEPROM

parameters settable via the MODE SELECT’s EEPROM Vendor Unique page are

returned.

NOTE

Because of the length of the parameter list, use MODE SENSE (10) instead of

MODE SENSE (6) to retrieve EEPROM parameters.

Because of the length of the list of EEPROM parameters, a 10-byte MODE SENSE

command is required. If a 6-byte MODE SENSE command is used for retrieval, the data

is returned as follows:

Send a 10-byte MODE SENSE command to get the Parameter List.

The data returned by the 10-byte MODE SENSE command for the EEPROM page is in

the form of a MODE SENSE (10) data header followed by block and page descriptors.

The data in the page descriptor is organized in the form of a parameter header followed

by the actual parameter’s value. The parameter is as follows:

Name T Current Default Minimum Maximum

Name refers to the parameter name, for example, PRODUCTID or DEFAULTCOMPON.

T designates data type: “b” indicates binary, “A” indicates string type, and if there is no

designator, the data is in decimal.

Current, Default, Minimum, and Maximum specify the current, default, minimum, and

maximum values of the parameter.

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 407 408

Comentários a estes Manuais

Sem comentários

Quantum DLT 8000 Manual Página 276

Comentários a estes Manuais

Manuais e produtos relacionados com Unidades de fita magnética Quantum DLT 8000