Quantum DLT 7 Manual descarregar pdf (Página 78)

Chapter 7 Fibre Channel Interface

Fibre Channel Speed and Topology

DLT-S4 Product Manual 60

Table 32 Fibre Channel Speed

Configuration

To Select This

Speed

Put Jumper on

These Pins Result

1 Gb per second 7 and 8 Tape drive attempts to synchronize the link at 1 Gb per

second only

2 Gb per second 5 and 6 Tape drive attempts to synchronize the link at 2 Gb per

second only

4 Gb per second 3 and 4 Tape drive attempts to synchronize the link at 4 Gb per

second only

Auto-negotiate No jumpers Auto Speed Negotiate: Tape drive attempts to synchronize

• first at 4 Gb per second

•then at 2 Gb per second

• then at 1 Gb per second

5 and 6

AND

3 and 4

Auto Speed Negotiate: Tape drive attempts to synchronize

• first at 4 Gb per second

•then at 2 Gb per second

• then at 1 Gb per second

Note: Pins 1 and 2 are spare pins that are not used; there is no effect if they are jumpered or not

jumpered.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 176 177

Sem comentários

Quantum DLT 7 Manual Página 78