
JULY 2007 MAGNUM 224, MAGNUM 448, STORAGELIBRARY T24, OR STORAGELOADER 2U
23-3
SEND VOLUME TAG PARAMETER LIST
Starting Element Address – Byte 02 and 03
This field specifies the minimum element address at which to start the search
for volume tag information that matches the template in the parameter list
(see below). Only elements with addresses greater than or equal to the
Starting Element Address are searched.
Note: The Starting Element Address must be 0 or a valid element address for the
library, but does not have to be an address of the type requested in the
Element Type Code. Only the elements of the requested element type are
searched.
Send Action Code – Byte 05, Bits 4 through 0
This field defines the specific function to be performed by this command. The
library supports a Send Action Code of 5h (translate, search all primary
volume tags, and ignore sequence numbers).
Parameter List Length – Bytes 07 through 09
This field specifies the length of the parameter list following this command.
The minimum length of the parameter list is 32 bytes (20h). The maximum
length is 40 bytes (28h).
23.3 SEND VOLUME TAG PARAMETER LIST
Volume Identification Template Field – Bytes 00 through 31
This field contains 32 bytes of volume identification information, which the
library compares to the volume tag (bar code) information stored in
nonvolatile memory. Only the first eight bytes are valid. Any additional bytes
must be 0 (null). The template is considered terminated after the first 0 byte is
detected. This field may contain the following characters:
Bit
Byte
7 6 5 4 3 2 1 0
00
Volume Identification Template Field
...
31
32
Reserved
...
39
? (3Fh
This character matches any single character at that position
within the field.
* (2Ah)
This character is a wild card that matches any characters
from that point on in that field. All characters past the “*”
in the field are ignored.
Comentários a estes Manuais