
11-6
SCSI REFERENCE 1014826
CHAPTER 11—MOVE MEDIUM (A5h)
Check Condition
The library returns Check Condition status for the following reasons:
The command is issued to an invalid LUN.
A Unit Attention condition is pending for the initiator.
The library has experienced an unrecoverable hardware error.
A reserved bit is set to 1 in the CDB.
The library is not ready because a magazine is removed.
The information in the cartridge inventory indicates that the requested
cartridge move operation cannot be performed.
After the library attempts to move a cartridge, it finds that the source is
empty or the destination is occupied.
The library encounters a problem while trying to move a cartridge. For
example, it encounters a place (put) error while moving a cartridge.
A parameter in the CDB is invalid (see Table 11-5 for sense data).
Table 11-5 Invalid parameters in the MOVE MEDIUM CDB and move errors
Sense
Key
ASC ASCQ
SKSV
Bit
C/D
Bit
BPV
Bit
Bit
Pointer
Field
Pointer
Error
3h 53h 00h 0 0 0 0 0 Media load or eject failed
5h 21h 01h 1 1 0 0 0002h Invalid transport element address.
5h 21h 01h 1 1 0 0 0004h Invalid source element address.
5h 21h 01h 1 1 0 0 0006h Invalid destination element address.
5h 24h 00 1 1 1 0 000Ah Invalid Invert field.
5h 24h 00h 1 1 1 — —
A reserved bit is set in the CDB. The
pointers point to the bit in error.
5h 3Bh 0Dh 0 0 0 0 0 Destination element occupied.
5h 3Bh 0Eh 0 0 0 0 0 Source element empty.
5h 3Bh 87h 0 0 0 0 0 Cartridge stuck in tape drive.
5h 3Bh 90h 0 0 0 0 0
Source cartridge is loaded inside the
tape drive and is not accessible.
5h 80h 05h 0 0 0 0 0 Source tape drive not installed.
5h 80h 06h 0 0 0 0 0 Destination tape drive not installed.
Comentários a estes Manuais