Quantum LTO 4 Guia do Utilizador descarregar pdf (Página 32)

Chapter 2 Installation Procedures

Installing the Tabletop LTO-4 (Model B) Half-Height Tape Drive

16 LTO-4 (Model B) Half-Height Tape Drive User’s Guide

3 As required, proceed to either:

• Installing the LTO Driver Software

on page 23

• Registering the LTO-4 (Model B) Half-Height Tape Drive

page 23

Installing the Tabletop LTO-4 (Model B) Half-Height

Ta p e D r i v e

The tabletop LTO-4 (Model B) Half-Height Tape Drive is a compact

external drive that connects to the host computer through an external

serial-attached SCSI (SAS) port.

Do not attempt to install the LTO-4 (Model B) Half-Height Tape Drive

until you have reviewed Handling Precautions and Installation

Guidelines on page 6.

To install the tabletop LTO-4 (Model B) Half-Height Tape Drive, complete

the following procedures in the order presented:

1 Depending on the interface configuration of the drive:

2 Connecting the Tabletop Drive Interface and AC Power Cables

page 18.

3 Restarting the Tabletop Drive System

on page 22.

4 Installing the LTO Driver Software

on page 23, if required.

IF the drive interface is . . . THEN . . .

parallel Small Computer

System Interface (SCSI),

proceed to Configuring the

Tabletop Parallel SCSI Tape Drive in

the following subsection to

configure the SCSI ID.

serial-attached SCSI (SAS), there is no need to configure the

SCSI ID, as SAS is a point-to-point

architecture. Skip to Connecting

the Tabletop Drive Interface and AC

Power Cables on page 18.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 97 98

Sem comentários

Quantum LTO 4 Guia do Utilizador Página 32