Quantum LTO 4 Guia do Utilizador descarregar pdf (Página 28)

Chapter 2 Installation Procedures

Installing the Internal LTO-4 (Model B) Half-Height Tape Drive

12 LTO-4 (Model B) Half-Height Tape Drive User’s Guide

Mounting the Internal

Ta p e Drive

You can mount the internal LTO-4 (Model B) Half-Height Tape Drive

either horizontally or vertically, but not upside down (see figure 4

Figure 4 Acceptable Mounting

Orientation

Mount the drive in a 5.25-inch, half-height drive bay as follows:

1 As required:

a Save and close your open files and terminate all running

applications.

b Shut down the workstation or server system.

c Disconnect the system AC power cord from the facility AC

power receptacle.

2 Remove the cover from the workstation or server system.

Note: See your computer manufacturer’s instructions for the proper

procedures to remove the cover.

3 Select an available 5.25-inch half-height bay and, if required,

remove the bay cover.

IF you mount the drive . . . THEN the . . .

horizontally, base of the drive must be within 15

degrees of horizontal.

vertically, side of the drive should be within 5

degrees of horizontal.

YES YES YES NO

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 97 98

Sem comentários

Quantum LTO 4 Guia do Utilizador Página 28