Quantum DLT 2500 Manual de Serviço Página 51

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 114
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 50
Connecting the Desktop DLT2000XT Tape Drive to the Host
35
4. Snap the wire cable clamps into place to secure the cable.
5. If you are connecting one more desktop DLT2000XT tape drive to an Indy or Indigo
2
workstation, use only a half-meter Centronics 50-pin to Centronics 50-pin X5-SCSIA
cable. Attach one end to the top connector on the rst tape drive and the other end
to the bottom connector on the last tape drive.
If you are connecting one more desktop DLT2000XT tape drive to a Challenge or
Onyx system, use only a one-meter Centronics 50-pin to high-density 50-pin (part
number 018-8124-001, with marketing code P-S-DLT25XT-SA).
6. If the DLT2000XT tape drive is the last or only device on the SCSI bus, you must
terminate the bus by installing the terminator included in the shipment to the top
SCSI connector, as shown in Figure 3-3.
Figure 3-3 Terminating the DLT2000XT Desktop Tape Drive
Terminator
5
Vista de página 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 113 114

Comentários a estes Manuais

Sem comentários