Quantum DLT 2500 Manual de Serviço descarregar pdf (Página 23)

Special SCSI Requirements for Deskside Systems

The external SCSI connector on the Challenge L or Onyx deskside products does not

come as a standard preconnected feature from the factory. The external SCSI connector

must be connected and conﬁgured by a trained ﬁeld installer during or after the

installation of the deskside host system.

Connection and conﬁguration of the external SCSI port is not considered an end-user

task. Opening of the I/O panel by anyone other than a trained and qualiﬁed service

person may violate safety agency requirements and regulations.

Note: Streaming tape drives such as the DLT2000XT tape drive or DLT2500XT stacker

require sustained data throughput from the system and host SCSI bus. To guarantee SCSI

bus throughput for sustaining streaming operation of the drive, conﬁgure the

DLT2000XT tape drive or DLT2500XT stacker as the only device on an individual SCSI

bus. Performance can be adversely affected when the DLT2000XT tape drive or

DLT2500XT stacker shares the bus with other devices. Sharing the bus with

low-utilization devices such as a CD-ROM drive or a 4-mm DAT or 8-mm tape unit can

allow acceptable performance.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 113 114

Sem comentários

Quantum DLT 2500 Manual de Serviço Página 23