Quantum DLT VS160 Manual do Utilizador descarregar pdf (Página 62)

ValueLoader Administration

Retrieving Information About the ValueLoader

48 Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

2 Press the [+] or [–] button until “View Event Log” appears on

the LCD screen. The LCD screen also displays the quantity of

errors and events currently stored in the event log.

3 Press the [Enter] button to access the most recently logged

event.

4 Press the [+] or [–] button to display each event in the log.

5 Press [Cancel] when done.

Firmware Revision 3

This option displays the revision of the firmware currently

installed in the ValueLoader.

To use this option, follow these steps:

1 From the Home screen or main menu, press the [+] or [–] button

until “Information” appears on the top line of the LCD screen.

2 Press the [Enter] button to access the available options.

3 Press the [+] or [–] button until “Firmware Rev” appears on the

LCD screen.

The LCD screen displays the revision of the firmware currently

installed in the ValueLoader.

4 Press [Cancel] when done.

Note: The tape drive and ATL ValueLoader firmware are a

single image, but displays as three firmware numbers on

the front panel.

Note: After a firmware update, the firmware revision

displayed on the LCD will not be updated until the

ValueLoader is power cycled.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 89 90

Sem comentários

Quantum DLT VS160 Manual do Utilizador Página 62