Quantum DLT VS160 Manual do Utilizador descarregar pdf (Página 60)

ValueLoader Administration

Running the ValueLoader System Test

46 Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

8 If you exported a data cartridge to make room for the code

upgrade cartridge, be sure to import the cartridge to its original

slot. See Importing Cartridges

on page 28 for instructions.

Using SCSI 3

Quantum has the files and instructions necessary to update drive

and ValueLoader firmware via SCSI. Refer to

www.quantum.com

for details.

Running the ValueLoader System Test 3

The System Test option cycles the ValueLoader through the

process of loading, calibrating, and unloading all cartridges in the

carousel. Running a System Test verifies the operational

soundness of both the ValueLoader and tape drive. The System

Test continues indefinitely until you press the

[Cancel] button. All

regular backup and restore operations are suspended while a

System Test is in progress.

To run a System Test:

1 From the Home screen or main menu, press the [+] or [–] button

until “Diagnostics” appears on the top line of the LCD screen.

2 Press the [Enter] button to select. “System Test” appears on the

LCD screen.

3 Press the [Enter] button to begin the test.

Note: After a firmware update, the firmware revision

displayed on the LCD is not updated until the

ValueLoader is power cycled.

Note: At least one cartridge must be in inventory before

running System Test.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 89 90

Sem comentários

Quantum DLT VS160 Manual do Utilizador Página 60