Quantum DLT VS160 Manual do Utilizador descarregar pdf (Página 24)

Installing the ValueLoader

Installing the ValueLoader into a Rack

10 Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

To install the ValueLoader, follow these steps:

1 Use a screwdriver to remove the two screws near the front on

each side of the ValueLoader.

2 Using the screws you removed in step 1, secure one mounting

bracket (from the rack kit) to each side of the ValueLoader, as

shown in figure 5

Figure 5 Installing

Mounting Brackets

(Left Side Shown)

3 Using the screws and clip nuts from the rackmount hardware

package, secure one rail to each side of the rack in the location

in which you plan to install the ValueLoader.

• Be sure to secure both the front and rear of each rail to the

rack. The rails extend to fit a variety of rack depths.

• The correct orientation of the left rail is shown in figure 6

Repeat for the right rail.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 89 90

Sem comentários

Quantum DLT VS160 Manual do Utilizador Página 24