Quantum DLT VS160 Manual do Utilizador descarregar pdf (Página 49)

Operating the ValueLoader

Cleaning the Tape Drive

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 35

To clean the tape drive, follow these steps:

1 From the Home screen or main menu, press the [+] or [–] button

until “Commands” appears on the top line of the LCD screen.

Press

[Enter].

2 Press the [+] or [–] button until “Clean Drive” appears on the

LCD screen. Press

[Enter].

3 If the carousel is full, the LCD screen displays “No slot free for

transfer”. Press the

[Cancel] button repeatedly until the main

menu or Home screen is displayed. Export a cartridge to make

room for the cleaning cartridge. See Exporting Cartridges

page 29 for instructions then return to step 1

to clean the tape

drive.

4 If the carousel is not full, the ValueLoader will select the first

available slot and prompt you to insert a cleaning cartridge.

5 Insert the cleaning cartridge into the ValueLoader Import/

Export slot.

Caution: Use only Quantum DLT1 compatible cleaning

cartridges in the ValueLoader, available at

www.quantum.com. Use of any other type of cleaning

cartridge could damage the read/write head in the

tape drive. Therefore, if you load any other type of

cleaning cartridge, the ValueLoader will

automatically unload it back into its original slot

within approximately 25 seconds.

Note: If you are using Operator’s Panel commands to clean the

drive, import the cleaning cartridge only after you have

selected the Clean Drive command. If you would like to

keep a cleaning cartridge in the ValueLoader, the backup

software must manage drive cleaning.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 89 90

Sem comentários

Quantum DLT VS160 Manual do Utilizador Página 49