Quantum DLT VS160 Manual do Utilizador descarregar pdf (Página 37)

Operating the ValueLoader

Operator’s Panel Overview

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 23

Indicators on page 25 for more information. Exporting the

indicated cartridge will clear the error condition. See Exporting

Cartridges on page 29 for instructions. If these symptoms occur on

multiple known good cartridges, consider cleaning the tape drive.

See Cleaning the Tape Drive

on page 34 for instructions. If a

particular cartridge causes error conditions repeatedly, that

cartridge may be defective or invalid.

Occasionally, you may see the message “In Transit,” which

indicates:

• An error condition has caused a cartridge to be left between its

slot and the drive. (Power cycle or reset the ValueLoader to

clear this condition.)

• A cartridge is unexpectedly found in the Import/Export slot

opening. (Power cycle or reset the ValueLoader to clear this

condition.)

If the tape drive has a cartridge loaded, the top line displays

“Drive loaded.” The cartridge currently loaded in the drive is

indicated by an alternating black block and the slot number as

shown in figure 10

. This display can also indicate that the specified

cartridge is being loaded, unloaded, imported, or exported, as well

as indications of reading, writing, calibrating, etc. The

ValueLoader status line indicates the current operation. An

example of this display is shown in figure 10

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 89 90

Sem comentários

Quantum DLT VS160 Manual do Utilizador Página 37