Quantum DX30 Guia do Utilizador descarregar pdf (Página 72)

Chapter 3 DX-Series Remote Management

System Status

54 Quantum DX-Series User’s Guide

Example: Assign the robot and tape drives 0 and 1 to port 5. From

the host, only the robot and tape drive 0 and 1 are visible from

port 5. Assign tape drive 2 and 3 to port 6. Only tape drive 2 and

3 are visible from port 6.

6 When all of the virtual devices have been assigned to the appropriate

port, click

Apply to accept the port settings.

System Status 3

The System Status page allows you to view information on the emulated

tape drives, robot, storage bins, and DX-Series system hardware.

Accessing System

Status

To access the System Status page, from the contents frame, click System

Status

The management frame displays the System Status page (see figure 33).

Note: Microsoft Windows has a known issue recognizing more

than eight LUNs on a single Fibre Channel port. See

Microsoft Knowledge Base Article 310072:

http://support.microsoft.com/default.aspx?scid=kb;en-us;310072

for information on reconfiguring Windows to overcome

this limitation.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 157 158

Sem comentários

Quantum DX30 Guia do Utilizador Página 72