Quantum DX30 Guia do Utilizador descarregar pdf (Página 138)

Appendix B Setup CD and Setup Menu

DX-Series Setup Menu

120 Quantum DX-Series User’s Guide

cartridge. For example, if you select 20 GB per cartridge, the

number of cartridges per RAID set is 80. If you select 1700 GB per

cartridge, the number of cartridges per RAID set is 1.

6 The cartridges are created on the storage arrays. Press Enter to

continue.

The DX-Series Setup Menu displays.

7 Type 5 to restart the DX software services.

The DX-Series system is now initially configured and ready to be

accessed via the management web pages. Disconnect the cable from

the DX-Series controller serial port.

Displaying

Diagnostic Data

Displaying diagnostic data is included in the DX-Series controller

software. It collects status information from the controller and the array

so it can be analyzed by Quantum.

To display diagnostic data:

1 Connect the service PC to the DX-Series controller (see Connecting to

the Controller on page 113).

2 At the system login prompt, type setup (all lower case characters)

and press

<Enter>.

The system prompts you for a password.

Note: The capacity estimates mentioned in the examples above

assume a RAID 5 configuration on the storage array with

“global hot” spare. If a “global hot” spare is not used, the

total capacity is increased by 400GB. If two “global hot”

spares are used, the total capacity is decreased by 400GB.

Note: Restarting DX software services does NOT reboot the

DX-Series system and takes much less time to complete.

Tech Tip: When trouble shooting any hardware failure within the

DX-Series hardware, have the diagnostic data prior to

calling Quantum customer support.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 157 158

Sem comentários

Quantum DX30 Guia do Utilizador Página 138