
Chapter 3 Basic Library Operations
SCSI ID
Quantum|ATL PowerStor L500 Series Tape Library User’s Guide 51
3
Press
ENTER
. The SCSI IDs for the tape library and associated
drives are displayed.
4
Press
SELECT
to return to the main menu.
Setting a SCSI ID
3
To change an existing drive or library SCSI ID:
1
Press
SELECT
until
SCSI ID?
is displayed.
2
Press
NEXT
.
View ID?
is displayed.
3
Press
NEXT
.
Set ID?
is displayed.
4
Press
ENTER
.
Set ID? Drive 0?
is displayed.
5
Press
ENTER
to change the drive 0 SCSI ID.
Set ID? Drive
0? 0?
is displayed.
6
Press
NEXT
to continue without changing the drive 0 SCSI ID.
7
Press
NEXT
until the desired drive is displayed.
8
Press
ENTER
.
Set ID? Drive x? 0?
is displayed.
9
If the SCSI ID information on the OCP is correct, press
ENTER
.
10
Proceed through each device using
NEXT
or
PREVIOUS
.
11
Press
ENTER
to execute any changes.
12
To change the library controller SCSI ID, press
NEXT
.
Set ID?
Library?
is displayed.
13
Press
ENTER.
Set ID? Library? 0?
is displayed.
14
Press
NEXT
or
PREVIOUS
until the desired SCSI ID address is
displayed.
15
Press
ENTER
to assign the new SCSI ID address.
Set ID?
is
displayed.
16
Press
SELECT
to return to the main menu.
17
Cycle power at the host to activate the new SCSI ID in the
system.
Comentários a estes Manuais