Quantum L500 Guia do Utilizador descarregar pdf (Página 44)

Chapter 2 Installing the L500 Series Library

Operating the Tape Library

28 Quantum|ATL PowerStor L500 Series Tape Library User’s Guide

version (top magazine in the tower version) is magazine 0. The

right magazine in the rack mount version (the bottom magazine in

the tower version) is magazine 1 (see figure 19

Inserting a

Cartridge

To insert a cartridge into a magazine:

Verify that all library SCSI library activity has stopped

(

Library Idle

should be displayed on the OCP).

To open the magazine door, using the OCP:

Press

SELECT

until

EJECT/UNLOCK?

is displayed.

Press

Eject Cartridge?

is displayed.

Press

Unlock Doors?

is displayed.

Caution:

Do not press on the metal tabs on the inside edge of

the magazine slots when a tape cartridge is present.

Caution:

Never apply labels to the top, bottom, or sides of tape

cartridges. Doing so can cause cartridge jams in the

tape library. Use the space on the front of the

cartridge for labels.

Caution:

Never attempt to manually move the CHM; damage

to the library could occur. If the CHM must be

moved, recycle power and wait until

Library

Idle

is displayed on the OCP. The CHM will then

be in its home position.

Note:

Use slot 0 when performing a microcode update; use slot 13

when using the optional AutoClean mode. The cleaning tape

should be stored in slot 13.

Note:

Insert and remove all cartridges at the front of the magazine.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 119 120

Comentários a estes Manuais

Sem comentários

Quantum L500 Guia do Utilizador Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Unidades de fita magnética Quantum L500