Quantum P2000 Guia do Utilizador descarregar pdf (Página 63)

Chapter 2 Basic Library Operations

Manually Ejecting a Tape Cartridge

ATL P2000 Series Automated Tape Library User’s Guide 43

When the Operate Handle indicator comes on, raise the insert/

release handle to eject the tape cartridge.

Pull the tape cartridge completely out of the drive.

Close and lock the library door.

Quantun SDLT and

IBM Ultrium LTO

Tape Drives

To manually eject a tape cartridge from Quantum SDLT or IBM

Ultrium LTO T200 tape drives:

Refer to Steps 1a-1f under DLT Tape Drives on page 42.

Press the Unload button on the drive. The Unload button

works the same as a soft eject (VCR-style) button.

Note:

Place your finger approximately 1/4 of an inch in

front of the drive’s cartridge opening to ensure that

the cartridge does not drop when ejected.

Caution:

Pause for at least 3 seconds, then grasp the tape

cartridge and slowly pull it half way out of the

drive.

Caution:

If the tape cartridge leader failed to detach from

the take-up leader, push the tape cartridge all of

the way back into the drive, press down the

insert/release handle, and return to step 2.

Otherwise, continue to step 5.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 145 146

Sem comentários

Quantum P2000 Guia do Utilizador Página 63