Quantum P2000 Guia do Utilizador Página 117

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 146
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 116
Appendix C Automatic Drive Cleaning
Reporting of Cleaning Mode
ATL P2000 Series Automated Tape Library Users Guide 97
Mode Select
Command
3
To change the automatic cleaning mode using the Mode Select
command set the Vendor Unique Page (20h) byte 2, bit 1 (AC) to:
One - enable automatic cleaning
Zero - disable automatic cleaning
To save the automatic drive cleaning mode setting in NVRAM set
the Mode Select command Save Page (SP) bit to one.
When the automatic drive cleaning mode setting is saved in
NVRAM, neither a SCSI bus reset or a power cycle of the P3000
will change the mode setting.
Reporting of Cleaning Mode
3
The current drive cleaning mode can be reported by:
Diagnostic Software
A Mode Sense command
Diagnostic
Software
3
To display the current drive cleaning mode from diagnostic
software select:
Config/Report Clean Tape
The diagnostic screen will display:
The current cleaning mode
The bar code label of each cleaning cartridge
The number of uses of each cleaning cartridge
The home storage element of each cleaning cartridge
The current storage element of each cleaning cartridge
Vista de página 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 145 146

Comentários a estes Manuais

Sem comentários