Quantum L200 Guia do Utilizador descarregar pdf (Página 62)

Chapter 4 Using the Library

Using Tape Cartridges

46 Quantum|ATL PowerStor L200 Series Library User’s Guide

Unloading a

Cartridge

To unload a cartridge from the tape drive:

1 Press Select until the message EJECT/UNLOCK? is displayed.

2 Press Next to display the message Eject Cartridge?.

3 Press Enter to display the message Eject Cartridge? Eject

Drive?.

4 Press Enter to display one of the following messages:

• Drive is Empty (there is no cartridge to unload in the drive)

• Drive NOT Present (there is no cartridge to unload in the

drive)

• Eject to Slot 0?

5 Press Enter to unload the cartridge.

The library returns the tape cartridge to its original slot. You

cannot choose to send the cartridge to a different slot.

After the tape cartridge is unloaded, Library Idle is displayed

on the OCP.

6 Press Select to return to the main menu.

Using the Cleaning

Cartridge

If the tape drive detects a failure during the calibration routine or if

an unrecoverable hard error occurs while writing or reading a

tape, the message Cln is displayed on the OCP. This message

indicates that the drive head may be contaminated and in need of

cleaning.

Note: Always use the cleaning cartridge to clean the drive. Do

not use cleaning solvents or attempt to service the tape

drive head.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 111 112

Sem comentários

Quantum L200 Guia do Utilizador Página 62