Quantum L200 Guia do Utilizador descarregar pdf (Página 30)

Chapter 2 Installing the Library

Receiving the Library

14 Quantum|ATL PowerStor L200 Series Library User’s Guide

Receiving the Library 2

When receiving the library from the shipper, unpack the library as

close to the installation location as possible.

Inspect the shipping pallet and carton for damage that may have

occurred during shipment and immediately report any damage to

the shipper.

The unpacking instructions vary depending upon whether it is a

desktop or rack mount library. If it is a desktop library, you should

have only one shipping carton. If it is a rack mount library, you

will have two shipping cartons. The larger carton contains the

library, and the smaller carton contains the rack mount kit.

Unpacking the

Library

To unpack the library (see figure 8

1 Remove the accessory kit.

2 Remove the packing foam from the top of the library.

3 Remove the library from the shipping carton.

4 Remove the library from the shipping bag.

5 Place the library in the installation location. If it is a rack mount

library, refer to the instructions supplied with the PowerStor

Rack Mount Kit.

6 Save the box and its packing materials in case the library

requires shipment at a later date.

Warning: The library weighs 37 lbs (17 kg). Two people should

perform any procedure that involves lifting or

moving the library.

Caution: If you are installing the rack mount version of the

library, use the PowerStor Rack Mount Installation Kit.

This kit provides necessary support brackets.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 111 112

Sem comentários

Quantum L200 Guia do Utilizador Página 30