Quantum L200 Guia do Utilizador descarregar pdf (Página 61)

Chapter 4 Using the Library

Using Tape Cartridges

Quantum|ATL PowerStor L200 Series Library User’s Guide 45

Loading a

Cartridge

To load a cartridge from a magazine slot into the tape drive:

1 Press Select until the message Load? is displayed.

2 Press Enter to display the message Load Slot 0?.

3 Press Next until the desired slot number is displayed.

4 Press Enter to select the slot number.

5 Press Enter to display one of the following messages:

• Drive is Full

A cartridge is already installed in the drive. To continue,

unload the cartridge from the full drive (see Unloading a

Cartridge on page 46), then perform the load function

again.

• Slot x is Empty

There is no cartridge available in the selected slot. To

continue, select a slot that contains the cartridge using the

Next or Previous buttons, or insert a cartridge into the

empty slot.

• LOADING or UNLOADING or CALIBRATING COMP

The library is in the process of completing an activity.

When the activity is completed, Library Idle is displayed on

the OCP.

• IDLE COMP

The load function is complete.

6 Take the action appropriate for the message.

During the loading process, the CHM performs several

functions and displays several messages.

After the tape cartridge is loaded, Library Idle is displayed on

the OCP.

7 Press Select to return to the main menu.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 111 112

Sem comentários

Quantum L200 Guia do Utilizador Página 61