Quantum ValueLoader Manual do Utilizador descarregar pdf (Página 70)

Diagnostics and Troubleshooting

ValueLoader Error Codes

56 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

Ensure the carrier is properly installed on the belt by gently pressing

on the top of the carrier and sliding it back and forth. If it is properly

attached to the belt, it should not move. If it moves, reinstall the

carrier.

11 Replace the top cover of the ValueLoader and reinstall the cover

screws and mounting brackets (if rackmounted).

ValueLoader Error Codes 4

If an error occurs during operation of the ValueLoader, the ValueLoader

stops the current operation and displays an error code on the top line of

the LCD screen. Unless otherwise noted in table 5

, attempt to resolve the

error by resetting or cycling power on the ValueLoader and retrying the

last operation. If the error persists, contact support personnel.

To view the error log, follow these steps:

1 From the Home screen or main menu, press the

[+] or [–] button until

Information appears on the top line of the LCD screen. Press the [Enter]

button to access the available options.

2 Press the

[+] or [–] button until View Event Log appears on the LCD

screen. The LCD screen also displays the quantity of errors and

events stored in the error log.

3 Press the

[Enter] button to access the most recently logged error

message.

4 Press the

[+] or [–] button to display each error in the log.

5 Press

[Cancel] when done.

A description of each of the error codes is provided in the following table.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

Sem comentários

Quantum ValueLoader Manual do Utilizador Página 70