Quantum DLT 4000 Manual descarregar pdf (Página 214)

SCSI Commands

5-114 Quantum DLT 4000 Tape Drive

MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)

5.10.3.7 EEPROM Vendor Unique Page (3Eh)

The tape drive supports the EEPROM vendor unique page (3Eh). All the

EEPROM parameters that are set via the MODE SELECT EEPROM Vendor

Unique page are returned.

NOTE

Because of the length of the parameter list, use MODE SENSE (10)

instead of MODE SENSE (6) to retrieve EEPROM parameters.

Because of the length of the list of EEPROM parameters, a 10-byte MODE

SENSE command is required. If a 6-byte MODE SENSE command is used for

retrieval, the data is returned as follows:

Send a 10-byte MODE SENSE command to get the Parameter List.

The data returned by the 10-byte MODE SENSE command for the EEPROM page

is in the form of a MODE SENSE (10) data header followed by block and page

descriptors.

The data in the page descriptor is organized in the form of a parameter header

followed by the actual parameter’s value. The parameter is as follows:

Name T Current Default Minimum Maximum

Name refers to the parameter name, for example, PRODUCTID or

DEFAULTCOMPON.

T designates data type: “b” indicates binary, “A” indicates string type, and if

there is no designator, the data is in decimal.

Current, Default, Minimum, and Maximum specify the current, default, minimum,

and maximum values of the parameter.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 299 300

Sem comentários

Quantum DLT 4000 Manual Página 214