Quantum Scalar 100 Guia do Utilizador Página 43

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 42
Using the Operator Panel 5-33
Scalar 100
Power On If the tape drive is turned on, the Power On indication is displayed.
Cleaning Required If the tape drive cleaning is required, the Cleaning Required indication
is displayed.
Error Code (LTO
drives only)
If a drive error condition exists, an Error Code indication is displayed.
All errors are preceded by the character “!” followed by the drive error
code. “!...” indicates drive failures detected by the library and the drive
is not capable of reporting the error.
!0 No Error. This code is displayed when power is
cycled on the drive or when diagnostics have
finished running and no error occurred.
!1 A cooling problem has occurred.
!2 A power problem has occurred.
!3 A firmware problem has occurred. The drive
determined that a firmware error occurred.
!4* A firmware or drive problem has occurred.
!5* A drive problem has occurred. The drive determined
that a drive hardware failure occurred. To prevent
damage to the drive, the drive may not allow you to
insert a cartridge until the drive is powered off, then
on.
!6* A drive problem has occurred. The drive determined
that an error occurred, but could not isolate the error
to faulty hardware or data cartridge.
!7* A media error has occurred. The drive determined
that an error occurred because of a faulty tape
cartridge.
!8* A drive SCSI bus error has occurred. The drive
determined that a failure occurred in the drive
hardware or in the SCSI bus.
!9 A drive or RS-422 error has occurred. The drive
determined that a failure occurred in the drive
hardware or in the RS-422 connection.
!C Drive cleaning is required.
Compression On If the tape drive is compressing data on tape, the Compression On
indicator is displayed.
Write Protect If the tape is write protected, the Write Protect indicator is displayed.
Tape Activity A tape drive is loading a cartridge.
Table 5-1 Drive Status Area Indications
Indicator Description
Vista de página 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 125 126

Comentários a estes Manuais

Sem comentários