Quantum FastStor 2 Guia do Utilizador descarregar pdf (Página 52)

52 6-00515-03 Rev A

5. Remove the top cover by lifting it from the back and easing it out from under the front panel

display cover, and then lift the cartridge carrier, with each cartridge you want to remove, straight

up from the autoloader.

6. On each carrier, carefully pull the cartridge lock lever away from the carrier, allowing the

cartridge to slide out of the carrier.

7. After removing the cartridges from the desired carriers, reinstall each carrier on the autoloader

belt.

• Make sure that the rollers on the bottom of the carrier are aligned in the carrier tracks.

• Make sure that the belt post beneath each carrier are inserted into the proper

autoloader belt loop.

NOTE:

To remove the carrier directly in front of the mail slot, gently rotate the

carousel counterclockwise by moving the belt or carriers until the carrier is

no longer in front of the mail slot.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Sem comentários

Quantum FastStor 2 Guia do Utilizador Página 52