Quantum DAT72 Guia do Utilizador descarregar pdf (Página 60)

Chapter 4 Operating Your Tape Drive

Loading a Cartridge

DDS-4/DAT 72 User’s Guide 48

Loading a Cartridge 4

Quantum DDS drives have a front-loading cartridge bay for easy

operation. To load a cartridge:

1 Hold the cartridge so the label is facing up and the exposed media is

facing the drive.

2 Gently insert the cartridge into the drive (see figure 17

). The drive-

bay door opens automatically when a cartridge is inserted.

After you insert the cartridge, there is a brief delay while the drive

identifies the cartridge type and state, and moves the tape to the data

area. Then the Media LED turns ON.

Apply just one label to the

designated area on the cartridge.

Affixing more labels can jam the

drive.

Never touch the exposed tape

media with your fingers.

If your data is important,

consider reading data off of tapes

and rewriting to new and

perhaps more modern tapes

every few years.

Never leave cartridges close to

magnetic fields, such as near a

monitor or telephone handset.

If cartridges are exposed to

temperatures or humidities

outside the specified operating

environment, expose them to the

operating environment for a time

equal to the period that the

cartridges were exposed to the

out-of-specification environment

(up to a maximum of 24 hours).

Do not read from or write to

cartridges when a temperature

change of 10° C per hour is

occurring.

Guidelines to Follow... Pitfalls to Avoid

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 80 81

Sem comentários

Quantum DAT72 Guia do Utilizador Página 60