Quantum P1000 Manual de Instruções descarregar pdf (Página 32)

ATL P1000 Series Library Unpacking Instructions

Document 6221100-02, Ver. 2, Rel. 0

March 1999

32 Packaging the Library for Reshipment

Procedure (continued)

Carefully lower the extension axis assembly so that it rests on

the foam block.

Hook the lip of the shipping restraint under the edge of the

bottom drive shelf (see figure 20 on page 30).

Move the gripper forward or backward as necessary so that it

fits underneath the shipping restraint.

Press the front edge of the shipping restraint downward until

the tab on the shipping restraint snaps into place.

Replace the load and bulk packs.

Close and lock the library doors.

Recrate the library:

Place the library in the shipping bag.

Place the library on the shipping pallet.

Replace the foam supports between the library and the pallet

(see figure 14 on page 23).

Place the shipping carton over the library and secure it with the

four clips.

Replace the foam supports inside the shipping carton.

Place the ramp (stand-alone library) or slide assembly (rack-

mount library) on top of the library (see figure 7 on page 11 and

figure 8 on page 12).

Place the accessories tray on top of the ramp or slide assembly.

Close and seal the shipping carton.

The library is now ready for reshipment.

1 2 ... 27 28 29 30 31 32

Sem comentários

Quantum P1000 Manual de Instruções Página 32