Quantum P1000 Manual de Instruções descarregar pdf (Página 13)

ATL P1000 Series Library Unpacking Instructions

Document 6221100-02, Ver. 2, Rel. 0

March 1999

Installing the Slide Assembly in the Rack 13

Installing the Slide Assembly in the

Rack

If you are installing a rack-mount library, install the slide assembly in

the rack before proceeding to “Removing the Library from the Pallet”

on page 22.

This procedure consists of the following steps:

‡ verifying that the rack meets the necessary requirements

‡ determining the mounting position of the slide assembly within

the rack

‡ mounting the slide assembly in the rack

‡ adjusting the slide assembly to allow for required clearances

Warning: Use safe lifting practices when moving the slide assembly

or the library. The slide assembly weighs about 25 lbs

(11.25 kg) and its size and construction make it awkward to

handle. The library weighs 89 lbs (40 kg); it must be lifted

with assistance. Failure to follow these guidelines may

result in equipment damage or personal injury.

Warning: When installing the library and other devices in the rack,

determine the weight of each device and position the

heaviest devices lower in the rack. If the library is the first

device to be installed, place it near the bottom of the rack.

Verifying the Rack

Requirements

Before installing the slide assembly in the rack, verify that the rack

meets the following requirements.

Rack Current Rating Consideration

Consider the current rating of the rack before installing more than one

P1000 library. The P1000 library is rated 6A/3A (120V/230V). This

means that no more than two libraries can be installed in a typical

15A/120V rack.

If other equipment is installed in the rack, determine the total current

rating of all the equipment before adding the P1000 library to the rack.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Sem comentários

Quantum P1000 Manual de Instruções Página 13