
Chapter 3 Operation
Understanding the Front Panel Display
24 LTO-5 Tape Drive User’s Guide
Clean
Second LED - Orange. Indicates whether the
drive needs cleaning.
Off Cleaning not required
On Cleaning cartridge being used.
The Ready LED flashes.
Flashing Cleaning needed. The LED
continues to flash if the drive is
power cycled, and will only go
out after a supported cleaning
tape has been used.
Ta p e
Third LED - Orange. Indicates tape problems
Off No fault
Flashing Current tape is faulty, such as
unreadable cartridge memory or
unsupported type. Do not use
the cartridge; replace it. The LED
will go out when a tape load
begins.
Drive
Fourth LED - Orange. Indicates drive problems
Off No fault
Flashing Unrecoverable hardware failure.
A power cycle or successful tape
load will turn the LED off, but the
LED will start flashing again if the
same operation is performed and
the hardware fault is still present.
Comentários a estes Manuais