Quantum 1200 Series DAT Autochanger Manual do Utilizador descarregar pdf (Página 80)

Chapter 3 Installing Your Tape Drive

Configuring and Installing a Tabletop Tape Drive with SCSI Interface

SDLT 600 Product Manual 64

• UL and CSA certified cordage rated for use at 250 V AC with a

current rating that is at least 125% of the current rating of the product.

• You must terminate the AC plug in a grounding-type male plug

designed for use in your country or region. It must also have marks

showing certification by an agency acceptable in your country or

region.

• The tabletop unit cord connector must be an IEC type CEE-22 female

connector.

• The cord must be no longer than 4.5 meters (14.5 feet).

• The cord must be FCC compliant with emissions specifications.

Figure 16

shows the AC power cord plug-end types for 115 V AC and

220/240 V AC usage.

Figure 16 AC Power Cord

Connector Types

The tabletop unit power supply has an auto-sensing feature; it requires

no adjustment or switch setting changes for different AC sources.

See figure 13

on page 60 and figure 16 for more details for the AC cord

and AC cord connector. Connect one end of the AC cord into the power

connector on the back of the tabletop tape drive; connect the other end of

the cord to the AC outlet. Upon completion, proceed to the next section to

confirm the installation.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 141 142

Sem comentários

Quantum 1200 Series DAT Autochanger Manual do Utilizador Página 80