
Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide 114
The media changer or tape drive configuration screen displays. Refer
to
table 23 for configuration options.
Table 23 Native Fibre Channel
Configuration Options
FC/iSCSI Bridge 3
This section allows users manage the FC1202 Fibre Channel bridge(s) or
TC2201 iSCSI bridges installed in the cabinet.
1 To access the FC/iSCSI Bridge page, from the Setup page, click on the
FC/iSCSI Bridge tab at the top of the page.
The FC/iSCSI Bridge page displays (see figure 77).
Configuration Option Description
Configured Speed Select 1 G, 2 G, or Auto negotiate
to set the configured speed
Configured Topology Select point-to-point, arbitrated
loop, or Auto negotiate to set the
configured topology.
Loop ID Select the loop ID. The loop ID
can only be set when the
configured topology is set to
arbitrated loop.
Note: The FC or iSCSI bridge information only displays when a Fibre
Channel or iSCSI bridge is installed in the library.
Comentários a estes Manuais