Quantum PX502 Guia do Utilizador Página 227

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 226
Appendix C Installing the PX502 Library
Installing the Library
Quantum PX500 Series User’s Guide 204
Avoid touching connectors and other components.
Installing the Library
Installing a PX502 library in a rack consists of the following steps:
Locating the Mounting Position
Installing the Library
Loading the Tape Cartridges
Initial Configuration
Locating the Mounting
Position 3
The PX502 library is designed to fit in a standard 19 inch wide rack.
It is important to the library installation to locate the hole pattern in the
rack rails (see
figure 49). The library must be installed at the beginning of
the hole pattern. Refer to table 48 for information on common rack hole
types.
Table 48 Rack Hole Types
Note: Dry climates and cold-weather heating environments
have lower relative humidity and are more likely to
produce static electricity.
Figure Description
Square rack holes are the most common type of
rack holes. They can accept either cage nuts which
mount from the back of the rail or clip nuts which
clip on from the side of the rack rail.
Cage nut
Clip nut
Vista de página 226
1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 293 294

Comentários a estes Manuais

Sem comentários