Quantum FC420 Guia do Utilizador descarregar pdf (Página 17)

Quantum ATL M2500 Library User’s Guide Addendum—Prism FC420 Bridge Option

Document 6473031-01, Ver. 1, Rel. 1

August 2002

Prism FC420 Services Software Commands 17

DisplayEvent

(Immediate)

Displays the current contents of the

event log. The log is filtered by the

current switch settings as described in

the DispEvent section. If the optional

all is selected, the display filtering is

temporarily suspended and all logged

events are displayed.

displayevent < all >

EccLog

Resets/displays the ECC error

statistics for the Fibre bridge. The get

command displays the statistics; the

set command resets the statistic

counters to zero.

set ecclog clear

get ecclog

ErrorLog

Resets/displays the error logs for the

Fibre bridge. The get command

displays the logs; the set command

resets the logs to zero.

set errorlog clear

get errorlog

EthernetSpeed

Sets/displays the Ethernet speed of the

Fibre connection. If auto is selected, the

current speed of the connection is

indicated in parentheses in the

response to the get ethernetspeed

command.

auto set ethernetspeed [10 | 100

|auto]

get ethernetspeed

Exit (Immediate)

Exits the current Telnet command line

interface (CLI) session. This command

has no effect during a serial or in-band

CLI session.

exit

FcAck0

Specifies whether ACK0 or ACK1 will

be returned in response to a Class 2

Fibre Channel data frame or sequence.

When enabled, this option sends

ACK0; when disabled, this options

sends ACK1.

disabled set fcack0 [enabled |

disabled]

get fcack0

FcClass2

Specifies whether the Fibre bridge will

support Fibre Channel Class 2

(Multiplexed) or Class 3 service.

disabled set fcclass2 [enabled |

disabled]

get fcclass2

FcConnMode

Sets/displays the connection mode for

the FC420 to arbitrated loop or point-

to-point. Applies to all three Fibre

Channel ports on each board.

loop set fcconnmode [loop | ptp]

get fcconnmode

FcDataRate

Sets/displays the data rate (in GB/s) at

which the Fibre bridge will operate.

auto set fcdatarate [1gb | 2gb |

auto]

get fcdatarate

Command Description Default Syntax

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Comentários a estes Manuais

Sem comentários