Quantum FC420 Guia do Utilizador descarregar pdf (Página 10)

Quantum ATL M2500 Library User’s Guide Addendum—Prism FC420 Bridge Option

Document 6473031-01, Ver. 1, Rel. 1

August 2002

10 Configuring FC420 Firmware

3 Set network properties and specify an IP address for the computer.

a Right-click the network icon on the computer’s desktop.

For some versions of Windows, this icon may be labeled

Network Neighborhood. For other versions of Windows, the

icon may be labeled

My Network Places or something similar.

b When the pop-up menu appears, select Properties. A Network

dialog box appears.

c Click the Protocols (Windows NT) or Connections (Windows

2000 or later) tab.

d Double-click the TCP/IP Protocol menu item. The TCP/IP

Properties dialog box appears.

e Click the Specify an IP address option button. The IP Address,

Subnet Mask, and Gateway fields become active.

f Type 10.0.0.x (where x is a number between 2 and 253) in the IP

Address field,

255.255.255.0 in the Subnet Mask field, and

nothing in the Gateway field.

g Click OK until you completely exit all dialog boxes.

h For Windows NT users, open a DOS window and type

ipconfig/release <Enter> followed by ipconfig/renew <Enter>.

(For other versions of Windows, this step is not required.)

4 Turn on the library.

5 Establish a Telnet connection to the FC420 Fibre bridge. To do this:

a Start a Telnet session from the computer desktop by selecting

Start > Run.

b In the Run dialog box, type telnet 10.0.0.1 and then click OK.

The Telnet window appears (as shown in figure 6

), indicating a

connection with the FC420 Fibre bridge. When you see the

Ready

prompt, command line mode is available.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Sem comentários

Quantum FC420 Guia do Utilizador Página 10