Quantum FC420 Guia do Utilizador descarregar pdf (Página 21)

Quantum ATL M2500 Library User’s Guide Addendum—Prism FC420 Bridge Option

Document 6473031-01, Ver. 1, Rel. 1

August 2002

Prism FC420 Services Software Commands 21

LogEvent

Sets the switches which control the

filtering performed when logging

events. The switches have the

following meanings and settings:

[enabled | disabled] switch: controls

whether or not events logging is

enabled or disabled.

[subsystem] switch: same as switch for

DispEvent in previous section

[event_level] switch: same as switch

for DispEvent in previous section

[status] switch: same as switch for

DispEvent in previous section

disabled

3Fh

3Fh

all

set logevent [enabled |

disabled] | [[subsystem]

[event_level] [status]]

get logevent

MaxEnclTempAlrm

Sets/displays the maximum enclosure

temperature alarm of the unit in

degrees C (5-40 degrees C).

70°C set maxencltempalrm [5 - 40]

get maxencltempalrm

Menu

Enables/disabled the menu interface.

Entering the command alone without

parameters toggles the current state.

menu <[enabled | disabled]>

MinEnclTempAlrm

Sets/displays the minimum enclosure

temperature alarm of the unit in

degrees C (5-40 degrees C).

0°C set minencltempalrm [5 - 40]

get minencltempalrm

OEMConfigFile

Reports the name (i.e., the contents of

the first record) of the OEM

configuration file stored in persistent

memory. This file is used to override

the factory default configuration of the

FC420 Fibre bridge.

get oemconfigfile

ParityLog

Resets/displays the parity error

statistics for the Fibre bridge. The get

command displays the statistics; the

set command resets the statistic

counters to zero.

set paritylog clear

get paritylog

Performance

Returns the performance data for a

user-specified Fibre port.

get performance <fp>

Command Description Default Syntax

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Comentários a estes Manuais

Sem comentários