Quantum Sun StorEdge L100 Manual do Utilizador descarregar pdf (Página 90)

Chapter 3 Changing the Library Configuration

Changing the Auto-Import Option

74 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide

Changing the Auto-Import Option 3

The

Auto-Import option controls how cartridges are moved from

the import/export slots of the mailbox to the magazine slots:

• Enabling this option causes the library to move any cartridges

in the import/export slots to the first (lowest element address)

free magazine slots automatically. The move is performed

automatically (without need for host commands) at both

power-up and whenever the import/export magazine is

inserted.

• Disabling this option removes the above capability; the host

software must issue SCSI commands to move cartridges from

the import/export slots to the required magazine slots.

To change the

Auto-Import setting:

1 Access the Configuration screen (see Accessing the

Configuration Screen on page 53).

2 Press the Up or Down buttons until Auto-Import is highlighted.

3 Press Select.

4 Use the Up or Down buttons to select the desired Auto-Import

setting. The available settings are

Enabled or Disabled.

Note: The default setting is Disabled.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 191 192

Sem comentários

Quantum Sun StorEdge L100 Manual do Utilizador Página 90