Quantum Sun StorEdge L100 Manual do Utilizador descarregar pdf (Página 75)

Chapter 3 Changing the Library Configuration

Changing the Emulation Setting

Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 59

Changing the Emulation Setting 3

The

Emulation option allows you to set the library to act as either a

Quantum ATL library or an M4 Data library.

To set the emulation:

1 Access the Configuration screen (see Accessing the

Configuration Screen on page 53).

2 Press the Up or Down buttons until Emulation is highlighted.

3 Press Select.

4 Use the Up or Down buttons to select the desired Emulation

setting. The available settings are

ATL M2500, ATL 1500, and

M4 Data.

5 Press Select.

To return to the

Configuration screen without changing the

option setting, press

Cancel.

6 Press Main to return to the main screen.

Note: The default setting for the L25 is M4 Data; the default

setting for the L100 is

ATL M2500.

Caution: If you do not return to the main screen after

changing this setting, your change will not be

saved to NVRAM.

Note: You must reboot the library before this setting will

take effect.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 191 192

Sem comentários

Quantum Sun StorEdge L100 Manual do Utilizador Página 75