Quantum Sun StorEdge L100 Manual do Utilizador Página 117
- Página / 192
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Chapter 6 Running the Demonstration Programs
Running the Demo 3 Program
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 101
Running the Demo 3 Program 6
The
Demo 3 program causes the robot to pick a cartridge from a
randomly selected occupied magazine slot and place it back in the
same slot. The robot then moves to another randomly selected
occupied slot and repeats the process.
To run the
Demo 3 program:
1 Verify that at least one magazine is installed in the library and
that at least one cartridge is present.
2 Access the Demo Programs screen (see Accessing the Demo
Programs Screen).
3 Press the Up or Down buttons to select Demo 3.
4 Press Select.
The
Demo 3 program starts. This program continues until you
press the
Stop button.
5 If desired, include the drives or the fixed slot in the test:
a Press the Level button to select the level where the desired
drive or fixed slot is located.
b Press Drive 1 or Drive 2 to include a drive.
c Press Fixed to include the fixed slot.
6 To stop the program, press Stop.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
7 Press Back to return to the Demo Programs screen.
- User’s Guide 1
- Contents 3
- Ta b l e s 12
- Audience 13
- Document 13
- Organization 13
- Preface 14
- Overview 1 17
- SCSI Configuration 1 18
- Library Scalability 1 18
- Chapter 1 Overview 19
- Library Scalability 19
- Table 1 Capacity, L25 19
- Multiple Library Stack 19
- Library Features 1 21
- Library Features 22
- Figure 1 L25 Front 22
- Figure 2 L100 Front 23
- Figure 3 25
- Figure 4 L100 Internal 26
- Back Panel 1 27
- Figure 6 L100 Back 28
- Basic Operations 2 29
- Introduction 2 30
- Stack button (see figure 8) 31
- Level button 32
- GUI Buttons 2 33
- Chapter 2 Basic Operations 34
- Introduction 34
- Table 4 GUI Icons 34
- Figure 12 Quick View 36
- Menu Screen 36
- Quick View Menu screen 37
- Figure 15 Sample 39
- Inventory Screen 39
- Figure 16 Sample 40
- Drive Power Screen 40
- Figure 17 Sample 41
- Moving Tape Cartridges 2 42
- Using the Mailbox 2 46
- Using the Mailbox 47
- Figure 23 Mailbox 48
- OPEN Screen 48
- Removing the Magazines 2 54
- Removing the Magazines 56
- Figure 25 Magazine 56
- Release Button 56
- Figure 26 Release 57
- Magazines Screen 57
- Release latch 60
- Viewing Statistics 2 61
- Press Stats 62
- screen (see figure 31) 62
- Viewing Library 63
- Statistics 63
- Viewing Statistics 64
- Figure 33 Sample 64
- Drive Statistics Screen 64
- Figure 34 Sample 65
- SCSI History Screen 65
- Stack Configuration screen 67
- Changing the Library 69
- Configuration 3 69
- Press Config 70
- screen (see figure 37) 70
- Setting the Library ID 3 71
- Changing a Tape Drive ID 3 72
- Changing a Tape Drive ID 73
- Setting the Time 3 83
- Setting the Date 3 84
- Performing Maintenance 93
- Operations 4 93
- Press Maint 94
- screen (see figure 40) 94
- Cleaning a Tape Drive 4 95
- Cleaning a Tape Drive 96
- Figure 42 Select Tape 96
- Drive Screen 96
- Figure 43 Sample 97
- Figure 44 Drive 98
- Power Screen 98
- Adjusting the Contrast 4 99
- Adjusting the Contrast 100
- Running Diagnostic 101
- Programs 5 101
- Press Diag 102
- The GUI displays the 102
- screen (see figure 47) 102
- Figure 48 Diags: 103
- General Screen 103
- Figure 49 Diag: 104
- Barcode Screen 104
- Running the Move Medium Test 106
- Figure 51 Move 106
- Cartridge TO Screen 106
- Confirm 107
- Figure 54 Diag: 109
- Move-Location Screen 109
- Figure 55 Diag: Move 110
- Location Screen 110
- Running the Display Test 5 111
- Running the Display Test 112
- Running the 113
- Demonstration Programs 6 113
- Figure 56 Demo 114
- Programs Screen 114
- Running the Demo 1 Program 6 115
- Running the Demo 2 Program 6 116
- Running the Demo 3 Program 6 117
- Running the Demo 4 Program 6 118
- Running the Demo 5 Program 6 119
- Running the Demo 6 Program 6 120
- Specifications A 121
- Physical Specifications 1 122
- Performance Specifications 1 123
- Reliability Specifications 1 124
- Tape Drive Specifications 1 125
- Appendix A Specifications 126
- Environmental Specifications 126
- Table 14 Compliance 126
- Fault Symptom Code 127
- (FSC) Dictionary B 127
- DLTtape Cartridge 175
- Maintenance C 175
- When To Visually 176
- Inspect a DLTtape 176
- Cartridge 176
- Figure 59 Write 179
- Protect Switch 179
- Regulatory Statements D 181
- Taiwan Statement 4 182
- Laser Statement 4 183
- Library Battery Statement 4 184
- MC300 Battery Statement 4 184
- Declaration of Conformity 4 185
- Figure 61 Declaration 186
- Glossary 187
Manuais e produtos relacionados com Hardware Quantum Sun StorEdge L100
Hardware Quantum DLT-V4 Manual do Utilizador
(2 páginas)
(2 páginas)
Hardware Quantum Bigfoot CY Manual do Utilizador
(2 páginas)
(2 páginas)
Hardware Quantum Atlas V Manual do Utilizador
(2 páginas)
(2 páginas)
Hardware Quantum 890 USE 155 Manual do Utilizador
(55 páginas)
(55 páginas)
Hardware Quantum Dynamic DX Manual do Utilizador
(8 páginas)
(8 páginas)
Hardware Quantum Scalar i500 Manual do Utilizador
(148 páginas)
(148 páginas)
Hardware Quantum DLT-S4 Manual do Utilizador
(22 páginas)
(22 páginas)
Hardware Quantum 10K II Manual do Utilizador
(371 páginas)
(371 páginas)
Hardware Quantum Atlas II Manual do Utilizador
(8 páginas)
(8 páginas)
Hardware Quantum QTM300CA Manual do Utilizador
(12 páginas)
(12 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais