Quantum FastStor 1 Guia do Utilizador descarregar pdf (Página 35)

the main menu entries except the View Data entry is selected, the loader will go to

its busy state, and SCSI commands will be terminated with Check Condition and

Not Ready status.

Setup Menu

To enter this menu, scroll to the Setup item in the Main Menu and press the Select

button. The loader enters the busy state when this menu is selected.

Item name Description

FastStor 1 setup This menu item gives access to the FastStor 1 setup

menu.

SCSI setup This menu item gives access to the SCSI bus setup

menu. Both the FastStor 1 and the Drive SCSI bus

setup are available here.

Remote

Management

setup

This menu item gives access to the Remote

Management setup menu. It allows the operator to

enable, disable and configure the Loader Web

interface.

FastStor 1 setup

The number of selectable values for each FastStor 1 setting are listed in the

following table.

Item name Legal values. Default value

Cleaning Slot Legal Slot ID 1..8 or 0 = not

selected.

0 = not selected

Barcode scan* Enabled, Disabled Enabled

Audible Alarm Enabled, Disabled Disabled

Set Language English English

* The barcode of the cartridge in each occupied magazine slot and in the drive (if any) will be

scanned during the Inventory process.

SCSI Setup

The SCSI setup menu allows selecting SCSI addresses for both the loader and its

internal drive. In addition, the SCSI Bus Parity can be enabled or disabled.

Because of the SCSI protocol, the values selected take effect only after the next

reset of the loader and drive.

FastStor 1 Installation and User Guide 29

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 77 78

Sem comentários

Quantum FastStor 1 Guia do Utilizador Página 35