Quantum ACL 452 Guia de Instalação descarregar pdf (Página 23)

Chapter 2 Unpacking the Library

Unpacking the Library

ACL 4/52 Facilities Planning and Installation Guide 7

Unpacking the Library

Caution: Use care when cutting the steel bands that secure the

library and packing materials to the pallet. These bands are

under tension and may snap when cut.

1 Cut the steel bands that secure the library and packing material to

the pallet (see figure 7).

2 Lift the cardboard top cover off the pallet.

3 From the back of the container (opposite the ramp side), pull the

three cardboard retaining clips to their open position, and unwrap

the cardboard box from the library

Figure 7 Removing the

Box from the Pallet

4 Lift the foam cap and accessories tray off the library (see figure 8).

5 Remove the stop block located underneath the library.

TA00139a

Ramp Side

(

Front/Off-load Side)

Top Cover

Steel Bands

Foam Cap and

Retaining

Clip (x3)

Cardboard Box

Pallet

Accessories Tray

TA00140a

➀

➁

➂

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Sem comentários

Quantum ACL 452 Guia de Instalação Página 23