Quantum LTO-4 (Model B) Informações Técnicas descarregar pdf (Página 11)

Installing the Tabletop LTO-4 (Model B) Half-Height Tape Drive 11

Product Line

Figure 8 Tabletop Parallel SCSI

ID Selector Switch

Parallel SCSI ID selector switch

Note: Parallel SCSI controllers and host adapters generally use ID 7. In some systems,

the boot drive uses ID 0 or ID 1. Avoid configuring the LTO-4 (Model B) Half-

Height Tape Drive to these SCSI IDs.

6 After configuring the parallel SCSI ID, proceed to Connecting the Tabletop Drive

Interface and AC Power Cables in the following subsection.

Connecting the

Tabletop Drive Interface

and AC Power Cables

As shown in figure 9 and figure 10, the rear panels of the tabletop LTO-4 (Model B) Half-

Height Tape Drives have connectors for:

• Either a 68-pin parallel SCSI cable (two connectors), or a 26-pin SFF-8088 mini-SAS

style interface cable

•The AC power cable

For the tabletop parallel SCSI drive, either SCSI connector can be used

as a SCSI IN or

SCSI OUT connection. This means you can use either connector to attach the drive to a

host computer or to another parallel SCSI device.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

Quantum LTO-4 (Model B) Informações Técnicas Página 11