
Chapter 3 Quantum PX720 Remote Management
Utilities
Quantum PX720 User’s Guide 169
1 Click Reboot.
The library reboots. The browser is redirected to a Rebooting page.
Reboot CLM 3
The Reboot CLM button allows you to remotely reboot the cross link
mechanism (CLM).
To reboot the library:
1 Click Reboot.
The CLM reboots.
Remove Cabinet (CLM Only) 3
The Remove Cabinet button is only available if a CLM is installed. Both
the CLM system and attached cabinet must been powered down for the
Remove Cabinet button to display. When the cabinet has been physically
removed from the CLM configuration, the
Remove Cabinet option can be
used to remove the cabinet from the remote management pages.
Calibrate 3
The calibrate utility allows the user to calibrate the following elements
within the library:
• Cabinet —select the cabinet to calibrate.
• All — calibrates all elements within the cabinet
• Slot — calibrates the slots within the cabinet
• Port — calibrates the load ports within the cabinet
Note: The Reboot CLM option is only available is a CLM is installed
in the library.
Note: As the CLM reboots, the CLM status transitions from
Not
communicating
to OK. When the status is OK, the reboot is
complete.
Comentários a estes Manuais