Quantum PX720 Guia do Utilizador Página 105

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 104
Chapter 2 Basic Library Operations
Inserting Tape Cartridges into the Load Port
Quantum PX720 User’s Guide 82
To perform a diagnostic test:
1 Use the up and down arrows to select the diagnostic test to perform
and press
Select.
2 The OCP displays a confirmation screen indicating the status of the
test, either failed or passed.
3 When you are finished performing diagnostic tests, press End to end
the test.
Stop Button 2
The Stop button located in the bottom right-hand portion of the OCP is
available from every OCP screen. This button stops the cabinet robot
from moving. To return the cabinet to the online state, press the
Start
button.
Inserting Tape Cartridges into the Load Port
This section explains how to insert tape cartridges using the load port
mechanism.
Inserting SDLT and LTO-2
Tape Cartridges 2
SDLT/LTO-2 tape cartridges are inserted into either a removable 16-
SDLT cartridge magazines or 18-LTO-2 cartridge magazine as shown in
figure 15 and figure 16 on page 29.
To insert a tape cartridge into a magazine:
1 Prepare the tape cartridges to be inserted by affixing a barcode label
and write-protecting or write-enabling each cartridge as desired.
For more information about these procedures, refer to Inserting Tape
Cartridges on page 40.
Note: The cabinet must be off-line before the diagnostic test can
complete.
Vista de página 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 258 259

Comentários a estes Manuais

Sem comentários