Quantum EC-LLDAA-YF-B Guia do Utilizador descarregar pdf (Página 53)

Chapter 3 Operating the Autoloader

Using Magazines and Magazine Blanks

Quantum SuperLoader 3 User’s Guide 33

The autoloader will not run unless both magazine openings are properly

closed. One way that you can close the openings is to use two

magazines. If you use only one magazine, then you must fill the other

magazine opening with a magazine blank for the unit to become

operational.

Note: Magazines, magazine blanks, and magazine handles are not

interchangeable between drive types. Please order the

appropriate part numbers when replacing these items.

Ejecting a Magazine When you want to remove several cartridges at once, eject the

magazine(s) first.

To eject a magazine:

1 From the main menu, scroll to

Commands, and then press Enter.

2 From the

Commands submenu, scroll to Eject, and then press Enter.

3 On the

Eject submenu, scroll to Right Magazine or Left Magazine, and

then press

Enter.

You will hear a distinctive popping sound as the appropriate

magazine is ejected from the autoloader.

Left magazine has been

ejected

or Right magazine has been ejected displays on the LCD.

Note: To prevent damage to the autoloader or the magazine, use

both hands when removing the magazine from the

autoloader supporting the entire length of the magazine.

4 Grasp the magazine by the handle with one hand and slide it out,

supporting it underneath with the other hand.

Note: Once you eject a magazine, you must fully remove it or

fully reinstall it before powering off the autoloader. Before

returning a magazine to the autoloader, manually turn the

wheels on the side of the magazine. If they move freely, the

cartridges are properly seated. If the wheels do not turn

freely, check the cartridges and remove and replace as

needed.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 209 210

Sem comentários

Quantum EC-LLDAA-YF-B Guia do Utilizador Página 53