Quantum Pathlight VX Guia do Utilizador Página 27

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 26
Pathlight VX User’s Guide 21
4 If the MS does not shut down in about 5 minutes, press the power button on the MS to power it off.
Continue with Shutting Down the Hardware
on page 21.
Shutting Down the Hardware
Use this procedure to shut down the system hardware.
1 If you have not already done so, shut down the system software and MS.
Refer to Shutting Down the System Software and the MS
on page 19.
2 Turn off the SNC by unplugging each utility module’s power cord from its AC power source.
3 Do one of the following:
If you are shutting down a Pathlight VX-450, go to Step 4
.
If you are shutting down a Pathlight VX-650, go to Step 5
on page 22.
4 Turn off each AX100SC power supply by pushing the power button on the back panel.
When the AX100SC(s) turn off, the power off sequence is complete for a Pathlight VX-450.
CAUTION
The host ports on each FC blade are turned off while the Pathlight VX
software shuts down. While the host ports are off, the FC blade's SFP
lasers do not send a signal and the host port link LEDs are off. The FC
blade's host ports and host port link LEDs do not turn back on until
the Pathlight VX start up process completes with no errors.
power button power LED
power button
Vista de página 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 189 190

Comentários a estes Manuais

Sem comentários