Quantum PX506 Manual de Instalação descarregar pdf (Página 24)

Quantum PX506 and PX510 Unpacking and Installation Instructions

Document 81-81338-01 D01

June 2005

24 Installing the Library

Table 3 Back Mounting

Bracket Orientation

Once the location is determined, attach the back brackets to each side of the

library with four M5 x 8 Allen screws (see figure 16

for the PX506 and

figure 17

for the PX510).

Rack Depth Mounting Position

> 27 to 28 in. Use holes A and C

> 28 to 29 in. Use holes B and D

> 29 to 30 in. Use holes A and C

> 30 to 31 in. Use holes B and D

> 31 to 32 in. Use holes C and E

> 32 to 33 in. Use holes D and F

> 33 to 34 in. Use holes E and G

> 34 to 35 in. Use holes F and H

> 35 to 36 in. Use holes G and I

Note: Use the shortest depth number. For example, if the measurement

is 34 in., use holes E and G.

Note: If this is a multiple stack configuration, refer to Installing

Additional Libraries on page 35 for information on preparing the

library chassis for passing tape cartridges from one unit to another.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Sem comentários

Quantum PX506 Manual de Instalação Página 24