Quantum PX506 Manual de Instalação descarregar pdf (Página 15)

Quantum PX506 and PX510 Unpacking and Installation Instructions

Document 81-81338-01 D01

June 2005

Installing the Library 15

e Close the front doors.

6 Remove the tape drive cover plates by loosening the captive screws

securing the plate to the library chassis with a flat blade screwdriver (see

figure 9

Figure 9 Removing the

Tape Drive Cover Plates

Installing the Library 0

Installing a PX506 and PX510 library in a rack consists of the following steps:

• Locating the Mounting Position

• Installing the Library

• Loading the Tape Cartridges

• Initial Configuration

Locating the Mounting

Position

Both the PX506 and PX510 libraries are designed to fit in a standard 19 inch

wide rack.

Note: If this is an upgrade to an existing library system or multiple

libraries are going to be installed in this rack, see Installing

Additional Libraries on page 35 for information on preparing the

library chassis prior to installation.

Cover plate

Tape

drive 2

Tape

drive 4

Tape

drive 6

Tape

drive 1

Tape

drive 3

Tape

drive 5

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Sem comentários

Quantum PX506 Manual de Instalação Página 15